Atum A5 Development Kit

The Atum A5 Development Kit is Terasic’s first development kit in the Intel® Agilex™ 5 FPGA portfolio. Powered by the largest Agilex® 5 SoC FPGA with 656K LEs, the Atum A5 Development Kit is an out-of-the-box platform for advanced AI and vision application development.

With a rich set of interfaces ranging from 2.5G Ethernet, high-speed DDR4, QSFP+, PCIe Gen 3×4, FMC+ connectors, to MIPI connector and HDMI, the Atum A5 excels in a wide range of applications, including industrial networking, AI, embedded vision, medical and healthcare, video applications, and various other I/O expansion and high-speed applications!

SKU: Atum A5 Categories: , ,

Description

Specifications

Atum A5 System Side

  • FPGA: A5ED065BB32AE4SR0 (656K LEs)
  • Dimension: 155 mm x 160 mm
  • Onboard USB-Blaster II
  • Support ASx4 Configure Mode with 512Mbits QSPI Flash
  • Active Heatsink
  • Board Management System
  • ◦ Power Monitor
  • ◦ Temperature Monitor
  • ◦ Auto Fan Control

FPGA Side

  • HDMI Output Port (Support 1080P)
  • DDR4-A: 4GB DDR4 with 32-bit data bus (no ECC). Shared with HPS
  • DDR4-B: 4GB DDR4 with 32-bit data bus (no ECC)
  • One FMC+ connector with 16 transceivers
  • One 2.5G Ethernet PHY + RJ45
  • One QSFP+ Port for 40 GbE network interface
  • Two 2-lanes MIPI Connector for Camera/Display
  • One PCIe Calbing Gen3 x4 Socket
  • One 3.3V 2×20 DE-GPIO Header
  • One 3.3V 2×6 TMD Header
  • User LED x4, Button x4, DIP Switch x4

HPS Side

  • MicroSD Socket and 8GB eMMC
  • DDR4-A: 4GB DDR4 with 32-bit data bus (no ECC). Shared with FPGA
  • Gigabit Ethernet PHY + RJ45
  • USB 3.1 Gen1 (5Gbps; use 1 transceiver) with USB Type-C connector
  • UART to USB Port
  • LED x1, Button x1, Cold Reset Button
  • One 3.3V 2×6 GPIO Header. Including One I2C Bus

Software Support

  • FPGA Example Code
  • Linux BSP

Block Diagram

 

Connection to FMC Daughter Card

Connect to HDMI-FMC Daughter Card:

Connect to XTS-FMC Daughter Card:

Connect to 12G SDI-FMC Daughter Card:

Connection to MIPI Module

Connection to MIPI CSI-2 Camera Module:

 

Layout

TOP:

Board Size

Kit Content

  1. Atum A5 Board
  2. Active Heatsink (Installed)
  3. MicroSD Card (Installed) + Card Reader
  4. Type-C USB Cable
  5. AC Power Cord
  6. 12V/10A 120W Power Supply
  7. Quick Start Guide

 

Scroll to Top