Intel® MAX® 10 – 10M08 Evaluation Kit

Intel® MAX®  10 FPGA Evaluation Kit is an entry-level board for the evaluation of the Intel® MAX® 10 FPGA technology.

With this evaluation board, you can:

  • Develop designs for the 10M08S, 144-EQFP FPGA
  • Measure FPGA power (VCC_CORE and VCC_IO)
  • Bridge between different I/O voltages (adjustable VCC_IO on Bank 8)
  • Read and write to the FPGA’s NOR flash memory
  • Use the FPGA’s analog-to-digital converter embedded block to measure incoming analog signals
  • Interface to external functions or devices via Arduino UNO R3 connectors or through-hole vias
  • Reuse the kit’s PCB board and schematic as a model for your design
SKU: Max 10M08 Categories: , Tags: ,

Description

The Intel® MAX® 10 FPGA – 10M08 Evaluation Kit includes the following:

  • CE-compliant Intel® MAX® 10 evaluation board
    • Intel® MAX®  10 FPGA (10M08, single power supply, 144-pin EQFP)
    • Intel® Enpirion® EP5388QI  point-of-load, 800 mA, DC-DC step-down (buck) converter with an integrated inductor
    • JTAG header for download cable programming (POF) or configuration (SOF)
    • 50 MHz single-ended, external oscillator clock source
    • Shunt resistors and probe points to measure FPGA power
    • Switch, push buttons, jumpers, and status LEDs
    • Connectors:
      • Arduino headers to accept UNO R3 compatible Shields
      • General-purpose through-hole vias
      • Type mini-B USB connector (power source)
        • USB cable included
      • Footprint to install a potentiometer (customer must purchase and install)
  • Intel® MAX®  10 FPGA (10M08, single power supply, 144-pin EQFP)
  • Free Intel® Quartus® Prime Lite Edition  software (download and license from website)
Scroll to Top