Starter Platform for OpenVINO™ Toolkit

Starter Platform for OpenVINO™ Toolkit • FPGA-026

Starter Platform for OpenVINO™ Toolkit is a PCIe based FPGA card with high performance and competitive cost. It’s equipped with the largest Cyclone V GT (or GX) device at 301K LE, and it supports PCIe Gen 2 x4(GX device will support PCIe Gen 1 x4). The board comes with 1GB DDR3, 64MB SDRAM, UART-to-USB interface, and extension headers such as GPIO and Arduino. This makes Starter Platform for OpenVINO™ Toolkit a re-configurable platform with adequate computing performance and low power consumption.

The package of Starter Platform for OpenVINO™ Toolkit includes reference designs for all the peripherals onboard. It also has a detailed user manual for developers to follow and start building up a system according to their needs immediately.

The Starter Platform for OpenVINO™ Toolkit is a perfect starting point as OpenCL HPC (High Performance Computing) development platform. It supports Intel FPGA OpenCL BSP for developers to design a system with high level programming language. The computation demanding tasks can be off-loaded from CPU to FPGA, resulting in significant system performance improvement.

SKU: fpga-026 Categories: , , Tags: ,

Description

Features of the Starter Platform for OpenVINO™ Toolkit • FPGA-026

FPGA Device
Cyclone V
• 301K Programmable Logic Elements
• 13,917 Kbits embedded memory
• Eight Fractional PLLs
• Two Hard Memory Controllers
• Nine Transceivers (the GT speed is 6.144G, and GX speed is 3.125G )
Configuration and Debug
• Quad Serial Configuration device-EPCQ256
• On-Board USB Blaster II (Mini-B USB connector)
Memory Device
• 64MB (32M x16) SDRAM
• 1GB (2 x256M x16) DDR3 SDRAM
Communication
• UART to USB（Mini-B USB connector）
• GT device supports PCIe Gen2x 4(GX device supports PCIe Gen1x 4)
Expansion I/O
2 x40 GPIO Header
• 36 General GPIO Pins
• Support 8 pairs LVDS TX and 8 pairs LVDS RX
• Diode protection circuit
• Configurable I/O standards: 1.5/1.8/2.5/3.3V
One Arduino Uno Revision 3 Expansion Header
Analog ADC
• SPI Interface
• 500Ksps Sampling Rate
• Eight Channels
• Analog Input Range：0 ~ 4.096 V
• Resolution: 12-bit
Digital IO
• Diode protection circuit
SMA IN/OUT 3.3V single port
Switches, Buttons, LED, and 7-Segments
• 5 User Buttons (4 normal buttons, one CPU_RESET_n)
• 4 User Switches
• 4 LEDs
• 2 7-Segments
Power
• 12V DC input
• PCIe 12V Input
Cooling
• 12V, 5000 Speed Fan

Scroll to Top