1. Mitsubishi PLC application program command practice
2. Sequence control, sensor control, pneumatic control practice
3. HMI drawing practice (including monitor)
4. Digital I/O practice using switches and lamps
5. Small and light bag type for easy movement and Storage
6. Safe power supply and overload prevention and storage by using 2-pole relay
The post PLC & HMI Trainer appeared first on EDU Market.
]]>1. Understanding and practicing timer and counter circuits.
2. Relay, sensor, switch, buzzer, DC motor, cylinder understanding and practice
3. Inductive, capacitive, photoelectric sensor understanding and practice
4. Pneumatic cylinder operation understanding and practice
5. HMI drawing practice (sequence, sensor, pneumatic, PLC application control)
PLC Composition
PLC Specifications
| Product Name | Specification |
|---|---|
| Power | AC100~240V, input:16, output:16 points |
| PLC | 7 inch TFT LCD wide touch screen |
| Touch Screen | Set pressure: 0.05 to 0.85 MPa |
| Regulator | Rated output voltage: DC 24[V] |
| SMPS | ¥ 12 (Red, Yellow, Green, Blue) |
| Push Button Switch | Contact capacity: AC 220[V] |
| Selector Switch | Shape: 3 steps |
| Lamp | ¥ 12 (No, Green, Blue, White) |
| Buzzer | ¥ 16, 24[V] |
| Circuit Breaker (2 Pole) | Breaking current: 30[A] |
| Relay | Relay: DC24[V] |
| Solenoid Valve | Single, double |
| Cylinder | Single acting, double acting |
| DC Motor | Voltage: 24[V], Current: 7.7[A], Rotation speed: 3000[rpm] |
| Sensor Unit (Capacitive) | Voltage: 12[V]~24[V], Detection distance: 8[mm] ± 10[%] |
| Sensor Unit (Inductive) | Voltage: 10[V]~30[V], Detection distance: 100[mm] |
| AC Input | 220[V] |
PLC Training Contents
Chapter 1. PLC Overview
Chapter 2. PLC Architecture
Chapter 3. PLC Wiring and Commands
Chapter 4. FX-PLC Configuration
Chapter 5. GX-work2 operation
Chapter 6. PLC Basic Command Practice
Chapter 7. PLC Numerical Data Practice
Chapter 8. Application Command and Programming Practice |
Chapter 9. Application Command and Programming Practice ||
Chapter 10. Sequence Control Practice |
Chapter 11. Sequence Control Practice ||
Chapter 12. Sensor Control Practice
Chapter 13. Pneumatic Control Practice
Chapter 14. PLC Control Using Touch Screen
Chapter 15. HMI Drawing – Software Installation
Chapter 16. HMI Drawing – Basic Usage
Chapter 17. HMI Drawing – Download and Upload
Chapter 18. HMI Drawing – Sequence Control Practice
Chapter 19. HMI Drawing – Sensor Control Practice
Chapter 20. HMI Drawing – Pneumatic Control Practice
Chapter 21. HMI drawing – PLC application control practice
PLC Components
| Product Name | Quantity |
| PLC | 1 |
| touch screen | 1 |
| regulator | 1 |
| SMPS | 1 |
| push button switch | 1 |
| selector switch | 8 |
| Lamp | 8 |
| buzzer | 1 |
| Circuit breaker for 2-pole wiring | 1 |
| solenoid | 1 |
| valve cylinder | 2 |
| DC motor | 1 |
| fuse | 1 |
| capacitive sensor | 1 |
| inductive sensor | 1 |
| photoelectric sensor | 1 |
| banana cable | 1set |
| case | 1 |
| textbook | 1 |
PLC Product Size
| Attribute | Details |
|---|---|
| Product Size | 640(L) X 420(W) X 250(H) mm |
| Package Size | 670(L) X 500(W) X 270(H) mm |
| Weight | Bag weight: 18kg / Packing box: 20.5kg |
The post PLC & HMI Trainer appeared first on EDU Market.
]]>Chapter 1: Summary of Smart Factory
Chapter 2: Introduction of smart factory training equipment
Chapter 3: Structure of conveyor-belt
Chapter 4: Conveyor Belt Sensor Control Practice
Chapter 5: Conveyor Belt Pneumatic Control Practice
Chapter 6: Inverter Control Practice
Chapter 7: PLC CC-link communication practice
Chapter 8: Practice of transferring goods using the gripper arm
Chapter 9: Summary of Automatic warehouse system
Chapter10: Automatic warehouse system sequence control practice
Chapter11: Automatic warehouse system sensor control practice
Chapter12: Automatic warehouse system pneumatic control practice
Chapter13: Structure of 4-axis robot
Chapter14: 4 axis robot product transfer practice
Chapter15: Product classification and product information acquisition practice using RFID
Chapter16: Automation Full Process Control Practice
The post Smart Factory System Trainer • ET-024 appeared first on EDU Market.
]]>1. Sensor, RFID and SW are integrated management of production process monitoring and work records
2. Through the convergence of IoT, gateway, monitoring system, etc., the entire production process is itelligentized and optimized to suit the production process
3. Customized practice based on advanced manufacturing technologies such as IoT and process simulation techniques are available for all processes such a production by product process and defect management.
4. Conveyor belt transfer and inspection test practice
5. Automatic warehouse system practice possible
6. 4-axis robot x, y, z-axis movement
7. Practice of numerical data transfer command using digital switch
Functions:
1. Build automation system and improve understanding
2. Understanding and using machine elements
3. Network system communication control practice between PLC
4. Control of analog and digital signals
5. Practice of process control language based on PLC, PC, FPGA in mass production
6. Practice of Conveyor belt control by using HMI
7. Practice of each process monitoring by suing Gateway
The post Smart Factory System Trainer • ET-024 appeared first on EDU Market.
]]>Chapter 1: Summary of conveyor-belt
Chapter 2: Conveyor-belt structure
Chapter 3: Practice of Sequence control
Chapter 4: Practice of Sensor control
Chapter 5: Practice of Pneumatic control
Chapter 6: Practice of Invertor control
Chapter 7: Practice of PLC CC-link communication
Chapter 8: Practice of transferring goods using the gripper arm
Chapter 9: Practice of Automated whole process product transfer
Chapter10: Practice of Automated whole process product inspection
Chapter11: Practice of GW and PLC communication
Chapter12: Conveyor Monitoring System Using GW
Chapter13: Automated process monitoring system using GW
Chapter14: Conveyor Belt HMI Design
Chapter15: Practice of conveyor-belt control using HMI
Chapter16: Practice of automation process control using HMI
The post 2 Layer Conveyor belt Trainer • ET-023 appeared first on EDU Market.
]]>1. Practice of automated process inspection, transfer and sorting process
2. Structure suitable for transport and detection related to conveyors during automation process
3. Self manual operation function and automatic operation function by PLC connection
4. Conveyor operating principles and easy application experiment with various sensors
5. The finished product is returned through the double-layer conveyor belt structure, and it is automatically transferred to the product input process
6. Product classification process practice of gripper-type structure mainly used in industry
7. Conveyor Belt Monitoring System Practice Using Gateway
Functions:
1. Practice of conveyor belt control using HMI
2. Conveyor belt control practice using PLC CC-link
3. Practice of Gripper Control Using Electric Pneumatics
4. Servo motor forward and reverse circuit practice using inverter
5. Characteristic training by sensor type
6. Practice of Self hold, logic circuit, timer, counter circuit
7. Practice of Conveyor Belt Sequence Real Wiring Control
The post 2 Layer Conveyor belt Trainer • ET-023 appeared first on EDU Market.
]]>Chapter 1. To install Pro-face Touch Screen
Chapter 2. How to use Pro-face Touch Screen
Chapter 3. Pro-face Touch Screen drawing practice
Chapter 4. Drawing practice applied with PLC Trainer and sequence
Chapter 5. Drawing practice applied with PLC Trainer, sequence module and switch module
Chapter 6. Drawing practice applied with PLC Trainer, sequence module and switch. sensor module
Chapter 7. Drawing practice applied with PLC Trainer, sequence module, sensor. pneumatic module
Chapter 8. PLC application control drawing practice
The post HMI Training System • ET-022 appeared first on EDU Market.
]]>1. Rigid aluminum hard case
2. Various communication port built-in (Serial, USB, Ethernet)
3. Supplying high pixel 7.5”, 65536 Color
4. LED backlight TFT LCD
5. Max. 32[MB] screen data saving
6. Able to create simple animation
7. Economic price
functions:
1. Relay circuit practice using drawing
2. Full-voltage-starting circuit using drawing
3. Timer, counter circuit practice using drawing
4. Motor control circuit practice using drawing
5. Sensor module circuit practice using drawing
6. Pneumatic module circuit practice using drawing
The post HMI Training System • ET-022 appeared first on EDU Market.
]]>Chapter 1. To install Omron Touch Screen
Chapter 2. How to use Omron Touch Screen
Chapter 3. Omron Touch Screen drawing practice
Chapter 4. Drawing practice applied with PLC Trainer and sequence
Chapter 5. Drawing practice applied with PLC Trainer, sequence module and switch module
Chapter 6. Drawing practice applied with PLC Trainer, sequence module and switch. sensor module
Chapter 7. Drawing practice applied with PLC Trainer, sequence module, sensor, pneumatic module
Chapter 8. PLC application control drawing practice
The post HMI Training System • ET-021 appeared first on EDU Market.
]]>1. Rigid aluminum hard case
2. Various communication port built-in (Serial, USB, Ethernet)
3. Supplying high pixel 7.0”, 65536 Color
4. LED backlight TFT LCD
5. Max. 120[MB] screen data saving
6. Able to create simple animation
7. Adopted in the manufacturing plant such as SAMSUNG and LG Electronics and etc.
functions:
1. Relay circuit practice using drawing
2. Full-voltage-starting circuit using drawing
3. Timer, counter circuit practice using drawing
4. Motor control circuit practice using drawing
5. Sensor module circuit practice using drawing
6. Pneumatic module circuit practice using drawing
The post HMI Training System • ET-021 appeared first on EDU Market.
]]>Chapter 1: summary of PLC
Chapter 2: PLC structure
Chapter 3: PLC wiring and commend
Chapter 4: Composition, FX-PLC
Chapter 5: Control, GX Developer
Chapter 6: PLC basic command
Chapter 7: PLC numerical data
Chapter 8: Application command & programming
Chapter 9: Programming practice
Chapter10: I/O expansion block connection
Chapter11: Digital switch connection
Chapter12: Display unit connection
Chapter13: Practice of Decimal conversion using digital switch
Chapter14: Practice of transmission command
The post PLC Trainer of In/Out Expansion Block Type • ET-020 appeared first on EDU Market.
]]>1. MITSUBISHI PLC Experiment practice Equipment
2. Basic program command and diversified application program command experiment and practice
3. Practice ladder design using timer and counter
4. Practice input and output contact extension using PLC and I/O expansion block
5. Practice arithmetic and logic operation using digital switch and 7-segment display unit
6. Practice of numerical data transfer command using digital switch
Functions:
1. Understanding and practice I/O contact expansion and wiring using input and output expansion block
2. Understanding and practice of wiring between application command and integrated PLC using digital switch
3. Practice of wiring connection and application instruction of integrated PLC and 7-segment display unit
4. Understanding numerical data transfer command and decoding of digital switch and 7-segment display unit
The post PLC Trainer of In/Out Expansion Block Type • ET-020 appeared first on EDU Market.
]]>Chapter 1 Outline of PLC
Chapter 2 Structure of PLC
Chapter 3 PLC wiring and command
Chapter 4 Composition of FX-PLC
Chapter 5 Installing the GX-Works 2 Program
Chapter 6 Basic Command Practice PLC
Chapter 7 Numerical Data Practice PLC
Chapter 8 Application Command Programming Practice
Chapter 9 Learning Programming
Chapter 10 I/O expansion block connection Practice
Chapter 11 Digital Switches connection Practice
Chapter 12 Display Units connection Practice
Chapter 13 Practice of Decimal conversion using digital switch
Chapter 14 Practice of transmission command using digital switch
Chapter 15 Practice Sequence Control ON/OFF Priority Operation Circuit
Chapter 16 Sequence Control Dual Coil Circuit Practice
Chapter 17 Practice Sequence Control On/Off Start Stop Circuit
Chapter 18 Sequence Control Basic Bistable Circuit Practice
Chapter 19 Practice Sequence Control Interlock Circuit
Chapter 20 Sequence Control Sequential Circuit Practice
Chapter 21 Sequence Control Motor Application Practice
Chapter 22 Sensor Module Control Practice
Chapter 23 Pneumatic Module Control Practice
Chapter 24 HMI Programming Practice
Chapter 25 IoT-based control practice
The post PLC Multi Application Trainer • ET-019 appeared first on EDU Market.
]]>1. MITSUBISHI PLC Experiment practice Equipment
2. Basic program command and diversified application program command experiment and practice
3. Practice ladder design using timer and counter
4. Practice input and output contact extension using PLC and I/O expansion block
5. Practice arithmetic and logic operation using digital switch and 7-segment display unit
6. Practice of numerical data transfer command using digital switch
7. Practice hex conversion using digital switch
Function:
1. Understanding and practice I/O contact expansion and wiring using input and output expansion block
2. Understanding and practice of wiring between application command and integrated PLC using digital switch
3. Practice of wiring connection and application instruction of integrated PLC and 7-segment display unit
4. Understanding numerical data transfer command and decoding of digital switch and 7-segment display unit
5. Practice of smart factory basic using sequence, sensor, pneumatic, HMI, IoT module
The post PLC Multi Application Trainer • ET-019 appeared first on EDU Market.
]]>Chapter 1 Outline of PLC
Chapter 2 Structure of PLC
Chapter 3 PLC wiring and command
Chapter 4 Composition of FX-PLC
Chapter 5 Installing the GX-Works 2 Program
Chapter 6 Basic Command Practice PLC
Chapter 7 Numerical Data Practice PLC
Chapter 8 Application Command Programming Practice
Chapter 9 Practice Sequence Control ON/OFF Priority Operation Circuit
Chapter 10 Sequence Control Dual Coil Circuit Practice
Chapter 11 Practice Sequence Control On/Off Start Stop Circuit
Chapter 12 Sequence Control Basic Bistable Circuit Practice
Chapter 13 Practice Sequence Control Interlock Circuit
Chapter 14 Sequence Control Sequential Circuit Practice
Chapter 15 Sequence Control Motor Application Practice [Option]
Chapter 16 Sensor Module Control Practice
Chapter 17 Pneumatic Module Control Practice
Chapter 18 HMI Programming Practice
Chapter 19 IoT Overview and H/W Structure
Chapter 20 IoT Internet-based Control Practice
The post PLC with IoT Training System • ET-018 appeared first on EDU Market.
]]>1. IoT based MITSUBISHI FX3u-32MR PLC
2. Control practice utilizing IoT Internet of Things WiFi communication
3. Experimental practice of basic programming command and various application program command
4. MITSUBISHI FX-PLC program and Operation experimental practice
5. Practice applied with Sequence module
6. Practice applied with switch module
7. Practice applied with sensor module
8. Practice applied with pneumatic module
9. HMI Programming Practice
functions:
1. Understanding and practice relay circuit
2. Understanding and practice full voltage starting circuit
3. Understanding and practice timer and counter circuit
4. Understanding and practice motor control circuit
5. Understanding and practice control circuit using switch module
6. Understanding and practice inductive, capacitive, fiber, pressure sensor
7. Understanding and practice single- acting and double – acting cylinder
8. HMI drawing practice
9. Understanding and practice IoT Internet of Things based control circuit
The post PLC with IoT Training System • ET-018 appeared first on EDU Market.
]]>Chapter 1 Outline of PLC
Chapter 2 Structure of PLC
Chapter 3 PLC wiring and command
Chapter 4 Composition of FX-PLC
Chapter 5 Installing the GX-Works 2 Program
Chapter 6 Basic Command Practice PLC
Chapter 7 Numerical Data Practice PLC
Chapter 8 Application Command Programming Practice
Chapter 9 Practice Sequence Control ON/OFF Priority Operation Circuit
Chapter 10 Sequence Control Dual Coil Circuit Practice
Chapter 11 Practice Sequence Control On/Off Start Stop Circuit
Chapter 12 Sequence Control Basic Bistable Circuit Practice
Chapter 13 Practice Sequence Control Interlock Circuit
Chapter 14 Sequence Control Sequential Circuit Practice
Chapter 15 Sequence Control Motor Application Practice [Option]
Chapter 16 Sensor Module Control Practice
Chapter 17 Pneumatic Module Control Practice
The post PLC Training System • ET-017 appeared first on EDU Market.
]]>1. MITSUBISHI PLC Experiment Practice Equipment
2. Basic Program Command and Diversified Application Program Command Experiment Practice
3. MITSUBISHI FX-PLC Program and Operation Experiment Practice
4. Practice applying Sequence Module
5. Practice applying Switch Module
6. Practice applying Sensor Module
7. Practice applying Pneumatic Module.
functions:
1. Understanding and practice of relay circuit
2. Understanding and practice of full voltage starting circuit
3. Understanding and practice of timer and counter circuit
4. Understanding and practice of motor control circuit
5. Understanding and practice of control circuit using switch module
6. Understanding and practice of inductive, capacitive, fiber and pressure sensor
7. Understanding and practice single- acting and double- acting cylinder
The post PLC Training System • ET-017 appeared first on EDU Market.
]]>Chapter 1 Outline of PLC
Chapter 2 Structure of PLC
Chapter 3 PLC wiring and command
Chapter 4 Composition of FX-PLC
Chapter 5 Installing the GX-Works 2 Program
Chapter 6 Basic Command Practice PLC
Chapter 7 Numerical Data Practice PLC
Chapter 8 Application Command Programming Practice
Chapter 9 Practice Sequence Control ON/OFF Priority Operation Circuit
Chapter 10 Sequence Control Dual Coil Circuit Practice
Chapter 11 Practice Sequence Control On/Off Start Stop Circuit
Chapter 12 Sequence Control Basic Bistable Circuit Practice
Chapter 13 Practice Sequence Control Interlock Circuit
Chapter 14 Sequence Control Sequential Circuit Practice
Chapter 15 Sequence Control Motor Application Practice [Option]
Chapter 16 Sensor Module Control Practice
The post PLC Training System • ET-016 appeared first on EDU Market.
]]>1. MITSUBISHI PLC Experiment Practice Equipment
2. Basic Program Command and Diversified Application Program Command Experiment and Practice
3. MITSUBISHI FX-PLC Program and Operation Experiment Practice
4. Practice applying Sequence module
5. Practice applying switch module
6. Practice applying sensor module
functions:
1. Understanding and practice of relay circuit
2. Understanding and practice of full voltage starting circuit
3. Understanding and practice of timer and counter circuit
4. Understanding and practice of motor control circuit
5. Understanding and practice of control circuit using switch module
6. Understanding and practice of inductive, capacitive, fiber and pressure sensor
The post PLC Training System • ET-016 appeared first on EDU Market.
]]>