DE10-Nano Kit FPGA

DE10-Nano Kit • FPGA-011

The DE10-Nano Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system. Altera’s SoC integrates an ARM-based hard processor system (HPS) consisting of processor, peripherals and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The DE10-Nano development board is equipped with high-speed DDR3 memory, analog to digital capabilities, Ethernet networking, and much more that promise many exciting applications.

SKU: fpga-011 Categories: , Tags: ,

Description

The DE10-Nano Kit • FPGA-011 board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects.

The following hardware is provided on the board:

FPGA Device

  • Intel Cyclone® V SE 5CSEBA6U23I7  device (110K LEs).
  • Serial configuration device  – EPCS64 (revision B2 or later).
  • USB-Blaster II onboard for programming; JTAG Mode.
  • HDMI TX, compatible with DVI 1.0 and HDCP v1.4.
  • 2 push-buttons.
  • 4 slide switches.
  • 8 green user LEDs.
  • Three 50MHz clock sources from the clock generator.
  • Two 40-pin expansion headers.
  • One Arduino expansion header (Uno R3 compatibility), can be connected with Arduino shields.
  • One 10-pin Analog input expansion header (shared with Arduino Analog input).
  • A/D converter, 4-pin SPI interface with FPGA.

HPS (Hard Processor System)

  • 800MHz Dual-core ARM Cortex-A9 processor.
  • 1GB DDR3 SDRAM (32-bit data bus).
  • 1 Gigabit Ethernet PHY with RJ45 connector.
  • USB OTG Port, USB Micro-AB connector.
  • Micro SD card socket.
  • Accelerometer (I2C interface + interrupt).
  • UART to USB, USB Mini-B connector.
  • Warm reset button and cold reset button.
  • One user button and one user LED.
  • LTC 2×7 expansion header.

Download Datasheet for DE10-Nano Kit • FPGA-011

Scroll to Top